Like our brass shower duo, but with a more modern, clean look, this shower tray is simply hung on the shower wall. It is particularly suitable for those made of glass, because on the one hand, the hooks of the brass brackets are slightly narrower, on the other hand, a glass edge protector made of polyamide is included in each case (for glass thicknesses of 6 and 8 mm).

The two trays of chrome-plated brass are each provided with drainage holes (Ø 5 mm) and - exceedingly practical - a larger hole of 2.8 cm in diameter, in which a razor can be hung. A wide, all-round "railing" and the edge of the shelf bent up at the front keep care products & co. in place. Two hooks on the lower shelf also hold washcloths, sisal bags and bath sponge or the squeegee for the glass wall. A matching shower shelf (for drilling or gluing) can also be found in our range.

Today, it seems everything gets a bright finish and one finish only – by chromium plating: the thinnest steel plates, zinc die-cast articles and even synthetic material. When you take the piece in hand, and the particular product does not weigh much, it indicates that you may find synthetic material underneath the plating. And, frequently, chromium plating is poor and inadequate. You notice that – usually too late –, when a paper-thin layer of chrome peals away after only a few weeks and the underlying metal begins to rust. (For example, there are chrome-plated steel appliances, upon which a discarded natural sponge turns brown in less than a few days.) These bathroom utensils are also chromed, but underneath there is massive, nickel-plated brass. Therefore, we can assure you that they will last. Most importantly, they won’t rust. They are produced in Germany France, Spain, and Italy – with a copper amount of approximately 60%.

Drilled tiles are always a nuisance, especially if a wall-mounted hook or holder should or must be subsequently relocated. We put an end to this annoyance by supplying the product not only with the conventional screw-on technique, but also with an additional set for adhesive mounting. The enclosed fast-curing adhesive is characterized by its high adhesive strength and can still be removed without residue if necessary.