Profitec Pro 300
![Profitec Pro 300 Stainless steel](https://assets.manufactum.de/p/205/205375/205375_01.jpg/profitec-pro-300.jpg?profile=pdsmain_150)
General Information
Rapidly aromatic. The Pro 300
In the Pro 300, a classic dual boiler machine, a ring brewing group with a 0.4 l brass boiler heats the water for the coffee. The second boiler with a capacity of 0.75 l is responsible for steam and hot water and is made of stainless steel. A large plastic tank with a capacity of 2.8 l ensures the water supply (the machine switches off automatically if the water level falls below a minimum level). The brewing temperature - best for espresso: 92 to 94 °C - can be programmed to the exact degree using the PID display on the front of your machine. Good to know: The Pro 300 is fast. The machine doesn't need more than three minutes to bring the ring brew group up to operating temperature. So if you want to offer your guests an espresso at the end of a meal, the cups will be on the table in no time. It only takes a little longer if a cappuccino is desired instead of an espresso, as switching on the steam boiler - to supply the steam lance with steam - extends the heating time by a further two minutes. The vibration pump with excellent acoustic damping ensures quiet, smooth operation. Energy-saving effect included: thanks to the separately programmable eco mode and boiler insulation, consumption is reduced slightly.
Profitec. Experience meets perfection
Originally founded as a pure sales company, Profitec has been designing and building its own espresso machines for over 30 years. Decades of experience meet perfection and classic Italian design meets German craftsmanship. Yes, indeed: the machines in the Profitec range are manufactured from A to Z at the company's headquarters near Neckargemünd. A second production site is located in Italy near Milan. And if you are now thinking: Wait, Neckargemünd? Isn't that where the espresso machine manufacturer ECM is based? Then you've been thinking in the right direction. The two companies have more than a friendly relationship, which can also be seen from the fact that the tried-and-tested ring brew group, which is also installed at Profitec, is normally used in ECM's single-circuit machines.
Instruction
General product information
Product Information
Article Number 205375
Stainless steel housing, with drain pan. Fresh water tank (volume approx. 2.8 l) made of plastic. Copper heater. Brewing pressure 8-10 bar, brewing temperature also variably adjustable. Water temperature 123 °C (steam and hot water extraction). Power consumption 2,200 watts. Safety plug (type F). Width 25 cm, depth 41.5 cm (with portafilter 47.5 cm), height 38.5 cm. Weight 18 kg. Cable length 1.2 m.
Accessories supplied: 1 portafilter with single-cup sieve (for 7 g espresso grounds), 1 portafilter with second-cup sieve (for 14 g), 1 blind sieve; stainless steel tamper with plastic handle (Ø 5.8 cm, height 7.5 cm, weight 205 g), cleaning brush.
Polished stainless steel case.
If you have a question concerning this product you are welcome to contact us. For this your E-Mail program will open.
Customer service
For advice, spare parts or special requests - our customer service will take care of your questions and concerns, personally and competently.
You can reach us from Monday to Friday at +49 2309 939095 or anytime at info@manufactum.com
Gift Certificates
It is good for everything: With our PDF gift certificates you can choose from the entire Manufactum selection. Pick a motif which you can send by email or print out and present personally, immediately after submitting your order.
Order now