Hair scissors stainless steel

Professional quality hair scissors with hollow grinding, light, smooth action and the characteristic fine micro-serration on the Unterbeck. The Wate (cutting edge) of the Oberbeck is carefully polished. The micro serration ensures that the cutting edges grip the hair well and do not jam or pluck. Thanks to the hollow grind, it is sharp and capable of cutting. A soft rubber buffer relieves the hand, and the screw-off finger hook makes it easy to hold and guide. So you can confidently lend a hand and trim the hair yourself, shorten the tips or straighten the bangs. And - another way to recognize a good pair of scissors - the legs are mounted with thread and screw. This allows two things: you can easily readjust the tension and, if necessary, give the hair scissors for grinding.

Dreiturm manufactures the hair scissors from the best scissors special steel. More than 80 operations are necessary for this, until the scissors after hardening in the fire can be ground by hand and pulled off. Afterwards, each one is again carefully controlled and checked for cutting ability.

These stainless steel manicure instruments come from the traditional manufacturer J. A. Schmidt & Söhne in Solingen. Since 1856, their manicure utensils have borne the Dreiturm trademark. And to this day, the family business, founded in 1829, has remained true to its long-standing location in Solingen and handcrafted production. Manufacture is no euphemism here: Most Dreiturm products are still made by hand. The scissors, for example, require more than 80 work steps in the making: starting with the initial shaping of the blank in the die, followed by the hardening and tempering, and finished with the overall grinding and fine grinding. The Solingen manufacturer has each instrument processed with particular care aiming for lasting durability.

You can recognise the high quality, among other things, by the smooth assembly of the scissor halves (consisting of the upper and lower shear blade) by means of thread and screw, by the fine-tuning and, last but not least, by the precise closing of the cutting edges. Scissors grinder may confirm: The edges should meet at one point only and, when the scissors are closed, the inner sides of the blades should rest with a sufficient margin in between – optimally, a minimal gap remains visible between the upper and lower halves. When opening and closing, the point of cutting moves alongside the blades up to the tip. With nail nippers, however, it is the other way round: the cutting edges are filed so tightly during the final check of the edge holding ability that the two blades only meet at one point: in the tip. Down the blades, a narrow gap, only visible against the light, remains. Only when squeezed, the edges close completely and tweak the nail easily and cleanly. The numerous production steps and the diligent work require time and, above all, a great deal of both: intuition and experience – assets no computer can simulate. Production is costly this way, yet, the investment pays off: These manicure instruments work precisely and reliably for a long time.